Machine Shop Home  
  Introduction  |   Shop Safety  |   Layout  |   Inspection  |   Bench  |   Cutting Fluids  |   Sawing  |  Drilling

Drilling Machines - Project 22C - Reaming
Drilling Home

Part # 22C

Part Description: Reaming on a Drill Press

Quantity Req.: 

Name _______________________ Date: _____________

PLEASE HAVE YOUR INSTRUCTOR INITIAL AND DATE THE GREY BOXES (*) AFTER THE REQUIRED OPERATIONS.
Click here to view the part specification.
Step# Location  Description  Initials  Date
10 Instructor Use stock from prior work.
20 Bench  Deburr.
30 Bench  Cap screw the 2 plates (plate 1 and plate 2) together forming an "L" shape 4" x 4".
50 Layout Table Layout the drilled and reamed hole locations.
60 Bench  Center punch hole locations.
70 Drill Press Center drill punched locations.
80 Drill Press  Drill "B" drill to proper depth through two plates.
90 Drill Press Chamfer top plate in two places.
100 Drill Press Set up to ream.
110 Drill Press Have your instructor check setup. *  
115 Drill Press Ream .2495 reamer to depth through both plates.
120 Bench Unscrew the two plates.
130 Drill Press Chamfer reamed holes on both plates.
140 Bench Deburr and clean off dye.
150 Bench Inspect the part and turn in for grading. *