Part # PS3C

                Part Desc: Cmm V- Block Inspection

                Quantity Req.: 2

 

PLEASE HAVE INSTRUCTOR INITIAL AND DATE AFTER REQUIRED OPERATIONS

 

                                                                                                          Instructor

Step #              Location                      Description                             Initials                   Date       

 

10                            Instructor                              Use the V-Blocks Previously

                                                                                machined in MS3.

 

20                            Bench                                     Stamp block numbers 1 and

2 in the slots.

 

30                            CMM                                     Fill in the space provided for

                                                                                the block number on the print.

 

40                            CMM                                     Measure both blocks and record

                                                                                the measurements in the spaces

provided. (You do not have to do

an Alignment to measure these

parts. Just use the individual

feature measurements of

Micromeasure).

 

 

50                            CMM                                     Measure Geometric Features

                                                                                ie. perpendicularity, parallalism

etc. and record answer in the

geometric symbol. (You do

not have to do an Alignment to

measure these parts. Just use the

individual feature measurements

of Micromeasure).

 

60                            Instructor                              Leave setup. Have Instructor

                                                                                Check random dimensions.

 

70                            Instructor                              Have Checked  off by Instructor