Machine Shop 2
 Lathe Operations - Project 9-1
Back to the Projects

Lathe Operations - Project 9-1
Tapers with a Taper Attachment
Part # PSN9#1

Part Description: Gear Spindle

Quantity Req.: 1

 Name _________________________

Date: ________________

PLEASE HAVE YOUR INSTRUCTOR INITIAL AND DATE THE GREY BOXES (*) AFTER THE REQUIRED OPERATIONS.
Click Here to view the part specification. 
Step# Location  Description  Initials  Date
10 Instructor Use gear spindle from PSN6-1. *  
15 Lathe Set up part between centers.  Check runout to assure meeting tolerance spec.
20 Lathe Using your textbook and the Information sheet for this unit, set up the taper attachment for the required taper.
25 Instructor Have your instructor check your setup. *  
30 Lathe Take a test cut on the part. Check taper for accuracy using the taper gage or other taper measuring methods.
40 Lathe Adjust the taper attachment if necessary.
50 Lathe Finish turning the taper to the print specifications.
60 Lathe Deburr entire job.
70 Bench Inspect part.
80 Instructor Turn in for grading. *