Machine Shop 2
Lathe Operations - Project 1-2

Back to the Projects

Lathe Operations - Project 1-2
Straight Turning Between Centers

Part # PSN1#2

Part Description: Draw Tube

Quantity Req.: 1

Name _________________________

Date: ________________

PLEASE HAVE INSTRUCTOR INITIAL AND DATE  GREY BOXES (*), AFTER REQUIRED OPERATIONS
Click Here to view the Part Specification 

Step# Location  Description  Initials  Date
10 Instructor Secure stock from instructor *  
20 Lathe  Face one end to clean up center drill #5 center drill
30 Bench  Layout overall length
40 Lathe Face to overall length & center drill
50 Lathe Set up to turn between centers. Using a test bar check for taper. Adjust if necessary.
60 Lathe Turn to 1.360 to 1.365 dia.
70 Lathe File the .03 radius. Check with a radius gauge.
80 Bench Clean, deburr and inspect
90 Instructor Turn in for grading *