Machine Shop 2
 Lathe Operations - Project 1-1
Back to the Projects

Lathe Operations - Project 1-1
Straight Turning Between Centers
Part # PSN1#1

Part Description: 

Quantity Req.: 1

 Name _________________________

Date: ________________

PLEASE HAVE INSTRUCTOR INITIAL AND DATE  GREY BOXES (*), AFTER REQUIRED OPERATIONS
Click Here to view the Part Spec A 
Step# Location  Description  Initials  Date
10 Instructor Secure stock from instructor *  
20 Lathe  Face one end to clean up  
30 Lathe  Center drill to depth shown
40 Bench Layout overall length
50 Lathe Face to length & center drill
60 Instructor Have checked by Instructor *  
70 Lathe Set up to turn between center  
80 Instructor Have set up checked *  
90 Lathe Take a trial cut. Check for taper. Adjust if needed.  
100 Lathe Turn 1.20 diameter.
110 Instructor Have 1.20 diameter checked. *  
120 Lathe Turn 1.125 diameter  
130 Instructor Have 1.125 diameter checked. *  
140 Lathe Turn 1.025 diameter.  
150 Lathe Set lathe compound for cutting chamfers
160 Lathe Cut chamfers
170 Bench Deburr and inspect
180 Instructor Turn in for grading *