Machine Shop Home  
  Introduction  |   Shop Safety  |   Layout  |   Inspection  |   Bench  |   Cutting Fluids  |   Sawing  |  Drilling

Drilling Machines - Project G2#5 - Angle Plate Part 2a
Drilling Home

Part # PSG2#5

Part Description: 

Quantity Req.: 

Name _______________________ Date: _____________

PLEASE HAVE YOUR INSTRUCTOR INITIAL AND DATE THE GREY BOXES (*) AFTER THE REQUIRED OPERATIONS.
Click here to view the part specification.

Step# Location  Description  Initials  Date
10 Instructor Obtain stock.*  
20 Bench  Deburr.
30 Bench  Cap screw the 2 plates (plate 1 and plate 2) together forming an "L" shape 4" x 4".
40 Layout Table Layout the drilled and reamed hole locations.
50 Bench  Center punch the hole locations
60 Radial Arm Drill Press Center drill the punched locations.
70 Radial Arm Drill Press Drill "D" drill to proper depth through two plates.
80 Radial Arm Drill Press Chamfer the top plate two places.
90 Radial Arm Drill Press Set up to ream.
100 Radial Arm Drill Press Have the instructor check setup. *  
105 Radial Arm Drill Press  Ream .2495 reamer to the program depth through both plates.
110 Bench Unscrew the two plates.
120 Radial Arm Drill Press Chamfer the reamed holes on both plates.
130 Bench Deburr and clean off the dye.
140 Bench Inspect the part and turn it in for grading.*