Machine Shop Home  
  Introduction  |   Shop Safety  |   Layout  |   Inspection  |   Bench  |   Cutting Fluids  |   Sawing  |  Drilling

Drilling Machines - Project G2#4 - Angle Plate Part 1
Drilling Home

Part # PSG2#4

Part Description: 

Quantity Req.: 

Name _______________________ Date: _____________

PLEASE HAVE YOUR INSTRUCTOR INITIAL AND DATE THE GREY BOXES (*) AFTER THE REQUIRED OPERATIONS.
Click here to view the part specification.

Step# Location  Description  Initials  Date
10 Instructor Obtain stock.*  
20 Bench  Deburr. 
30 Bench  Clamp the two plates (plate 1 and plate 2) together forming an "L" shape 4" x 4".
40 Instructor Have the instructor check clamping.*  
50 Bench Transfer punch .250-20 tapped hole locations.
60 Bench  Unclamp the parts.
70 Bench Center punch the transfer punched locations.
80 Radial Arm Drill Press Center drill the punched locations.
90 Radial Arm Drill Press Drill with a #7 drill, 3 places.
100 Radial Arm Drill Press Set up to power tap holes.
Have instructor check setup.		 *  
110 Radial Arm Drill Press  Power tap the holes.
120 Bench Deburr and clean off the dye.
130 Bench Inspect the part and turn it it in for grading.*