Machine Shop 1 Drilling Machines

		Machine Shop Home

Introduction \| Shop Safety \| Layout \| Inspection \| Bench \| Cutting Fluids \| Sawing \| Drilling

Drilling Machines - Project 3
Drilling Home

Part # PSG2#3 (24C)
Part Description: Angle Plate 1

Quantity Req.: 1

Name _______________________ Date: _____________

PLEASE HAVE YOUR INSTRUCTOR INITIAL AND DATE THE GREY BOXES (*) AFTER THE REQUIRED OPERATIONS.
Click here to view the part specification.

Step# Location Description Initials Date

10 Instructor Obtain stock. *

20 Bench Deburr.

30 Radial Arm Drill Press Set up part the part for power tapping. Have your instructor check the setup. *

40 Radial Arm Drill Press Using cutting oil, power tap the holes.

50 Bench Clean and deburr the part.

60 Bench Inspect the part and turn it in for grading. *

Step#	Location	Description	Initials	Date
10	Instructor	Obtain stock.	*
20	Bench	Deburr.
30	Radial Arm Drill Press	Set up part the part for power tapping. Have your instructor check the setup.	*
40	Radial Arm Drill Press	Using cutting oil, power tap the holes.
50	Bench	Clean and deburr the part.
60	Bench	Inspect the part and turn it in for grading.	*